The TPZIS wireless Immersion Temperature Sensor monitors the liquid flow temperature in pipework and transmits the data back over a wireless network to the TPZ-Net Co-ordinator using Zigbee communications. The sensor delivers this data according to a pre-set timing schedule or after a specific change in value (COV) to the measure value.
The sensors offer low cost and quick installation due to the removal of any cabling and the device being battery powered.
Designed for commercial, educational and retail applications, the TPZ-Net sensor data is exposed to a BACnet MS/TP or Modbus network via the TPZ-Net co-ordinator allowing for a full integration to a building management system (BMS).
The TPZ-Net solution provides simple and intuitive commissioning using the Titan Products TPZ-Net COMKIT for setup of wireless networks and to pair the sensors with the TPZ-Net co-ordinator.
Self healing, mesh networking can be added to the network to add further robustness to network topology by adding TPZ-Net repeaters to the network.
The TPZIS is supplied with 1 metre of cable between the sensor probe and IP65 housing to provide with an operating range of 0-100’C.
For smaller pipework a 65mm version is available.
All TPZIS sensors are fully compatible with Titan Products’ range of immersion pockets.
It is strongly recommend to perform a site survey prior to installing any wireless sensors.
- Zigbee wireless technology
- Up to 5 year battery life
- Up to 60m signal stength
- Easy set up through PC software or hand held tool
- +/- 0.5°C accuracy
- Up to 99 sensor points per co-ordinator from 30 TPZ-Net devices
- Designed and manufactured in the UK
Quantity Price Breaks:
- 10+ units = 5% discount
- 25+ units = 10% discount
- 50+ units = 20% discount
- 100+ units = 25% discount
Got a question? Call us on 0161 406 6480 or email firstname.lastname@example.org